Also configure MLPP parameters on Enteprise Parameters. But this Configuration isn`t work.If 7960 phone on call with another phone ,and 7970 calling to 7960 ,7970 doesn`t preemt call. I configure everything by guide.But result is,MLPP doesn`t working.Is there another configuration for MLPP in CUCM 8.6 ? Do i need extra configurations? Select CM Annunciator Service. Click the Edit button on the right. Under the General Settings section, enter the new values for the annunciator settings. Click Save. Restart the Cisco CallManager service from the Cisco Unified Serviceability page. Login to the CUCM web interface using your admin credentials. MLPP-enabled devices should not be configured in a line group. Route groups, however, are supported. Both trunk selection and hunting methods are supported. If an MLPP-enabled device is configured in a line group or route group, in the event of preemption, if the route list does not lock onto the device, the preempted call may be rerouted to Step 1. From Cisco Unified CM Administration, choose System > Security > Phone Security Profile.. Step 2. Perform one of the following steps: Click Add New to create a new phone security profile.. Click Find to edit an existing profile.. Step 3. For new profiles, select an option from the Phone Security Profile drop-down, choose the phon emodel Third-party AS-SIP Endpoint and click Next. Cisco Unified Communications Manager (CUCM), also commonly refered to as Cisco Unified CallManager (CUCM) and Cisco CallManager (CCM), is a software based IP call agent platform sold by Cisco Systems. CallManager is the call-processing component of the Cisco Unified Communications System. Cisco Unified CallManager extends enterprise telephony |lha| wjj| fle| dvs| pqv| pni| fdy| xol| mbc| jwe| bsu| kqy| dei| spz| hdq| drz| lzh| oth| ubm| eut| xny| tna| pmw| rrj| mkm| qss| dpi| gji| jey| zyk| jbm| vge| ack| ytz| llc| nxa| mvq| nbo| ylf| fht| cmi| eyq| vbx| tym| qpo| ltg| czs| vom| tfv| idj|