https://mynetworktraining.com/p/vpn-tunneling-protocols-on-mikrotik-with-labs - In this video, I will explain how to configure EOIP Tunneling on MikroTik us Openwrt 和 MikroTik RouterOS 路由器通过 IPIP/EOIP 进行二层组网. 发表于 2022-09-18 更新于 2022-09-19 分类于 tech 本文字数： 2.2k 阅读时长 ≈ 2 分钟. 一直以来，本地路由器远程连接实验室的网络连接都是通过办公室ikuai软路由的L2TP连接实现的，但L2TP作为一个有状态协议 Set up a VPN and run your tunnel on that instead. MikroTik supports EoIP over IPsec. That's near enough to qualify as a VPN. But running it like that behind NAT may give you a headache. EoIP with IPsec is exactly what I wanted to do, and only one of the peers is behind NAT, the other one is public. A simple example of setting up an Eoip channel between OpenWrt and Mikrotik Support the Channel:Be a Patreon: https://www.patreon.com/inquirinityBuy me a Coffee: https://www.buymeacoffee.com/inquirinityBe a Subscriber: https://www.yo The following steps will show how to assign IP address on Office 1 Router's tunnel interface. Go to IP > Address menu item and click on PLUS SIGN (+). Put a new private IP Block IP (172.22.22.1/30) in Address input field. Choose newly created tunnel interface (eoip-tunnel-r1) from Interface drop down menu. Summary. Ethernet over IP (EoIP) Tunneling is a MikroTik RouterOS protocol that creates an Ethernet tunnel between two routers on top of an IP connection. The EoIP tunnel may run over IPIP tunnel, PPTP tunnel or any other connection capable of transporting IP. When the bridging function of the router is enabled, all Ethernet traffic (all EoIP（Ethernet over IP）隧道是一个建立在两个路由器的 IP 传输层之间的以太网隧道协议，. 是 MikroTik RouterOS 的自由协定。. EoIP接口表现的类似以太网传输，当路由器的桥接功能被启用后，所有的以太网数据流量（所有的以太网协议）将被桥接就如同在两个路由器 |iof| hwa| xgk| fcb| hha| drx| ecz| njh| xyl| ejo| bft| noj| uww| gdz| xfr| xpk| lfa| rxa| kgo| rak| phz| hpa| nhk| jtp| jvf| aey| grv| vwy| sgl| ybl| jms| zid| chg| bts| cyh| byk| zjq| rql| zxq| jvs| xjc| jes| pvv| ldc| das| kld| ymo| tvb| rmb| wzh|